CLI Guide

login statistics
Enable and configure user login statistics on console and virtual terminal lines.
Syntax
login statistics {enable | time-period days}
no login statistics {enable | time-period days}
Parameters
enable
Enables login statistics for the last 30 days by default.
time-period days
Sets the number of days the system stores user login
statistics; range is from 1 to 30.
Defaults Not configured
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.8(0.0) Introduced on the S4810, S4820, S5000, S6000, S6000-
ON, and Z9500.
Usage Information
Only the system and security administrators can configure login activity tracking
and view the login activity details of other users.
If you enable user login statistics, the system displays the last successful login
details of the current user including failed login attempts by others.
If you use the login statistics time-period days command to set a
custom time period, the system only reports the login statistics during that interval.
NOTE: Login statistics are not applicable for login sessions that do not use
authentication on user names. For example, the system does not report login
activity for a telnet session that prompts only a password field.
Example
When you log into the system, it displays a message similar to the following:
$ telnet 10.11.178.14
Trying 10.11.178.14...
Connected to 10.11.178.14.
Escape character is '^]'.
130
Control and Monitoring