CLI Guide

Version Description
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information To specify a distance for routes learned from other routing domains, use the
redistribute command.
distribute-list in
Apply a filter to incoming routing updates from OSPF to the routing table.
Syntax
distribute-list prefix-list-name in [interface]
To delete a filter, use the no distribute-list prefix-list-name in
[interface] command.
Parameters
prefix-list-name Enter the name of a configured prefix list.
interface (OPTIONAL) Enter one of the following keywords and slot/
port or number information:
• For Port Channel groups, enter the keywords port-
channel then a number. For the C-Series, S-Series, and
Z9000, the range is from 1 to 128.
For Z9500, the range
is from 1 to 512.
• For a SONET interface, enter the keyword sonet then
the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number
from 1 to 4094.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
Open Shortest Path First (OSPFv2 and OSPFv3)
1207