CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1201

metric metric-

value

(OPTIONAL) Enter the keyword metric then a number to

configure a metric value for the route. The range is from 1

to 16777214.

metric-type type-

value

(OPTIONAL) Enter the keywords metric-type then an

OSPF link state type of 1 or 2 for default routes. The values

are:

• 1 = Type 1 external route

• 2 = Type 2 external route

route-map map-

name

(OPTIONAL) Enter the keywords route-map then the name

of an established route map.

Defaults Disabled.

Command Modes ROUTER OSPF

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for the Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

Commands

• redistribute — redistributes routes from other routing protocols into OSPF.

1202

Open Shortest Path First (OSPFv2 and OSPFv3)