CLI Guide

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
clear ip ospf statistics
Clear the packet statistics in interfaces and neighbors.
Syntax
clear ip ospf [process-id] [vrf vrf-name] statistics [interface
name {neighbor router-id}]
Parameters
process-id Enter the OSPF Process ID to clear a specific process. If no
Process ID is entered, all OSPF processes are cleared.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
clear all OSPF routing tables corresponding to that VRF.
statistics Enter the keyword statistics to clear the packet statistics in
interfaces and neighbors.
interface name (OPTIONAL) Enter the keyword interface then one of the
following interface keywords and slot/port or number
information:
• For Port Channel groups, enter the keywords port-
channel
then a number. For the C-Series and S-Series,
the range is from 1 to 128.
Open Shortest Path First (OSPFv2 and OSPFv3)
1197