CLI Guide

brief (OPTIONAL) Display a single line summary of the tracking
information for a specified object, object type, or all tracked
objects.
vrf vrf-name (OPTIONAL) E-Series only: Display information on only the
tracked objects that are members of the specified VRF
instance. The maximum is 32 characters. If you do not enter
a VRF name, information on the tracked objects from all
VRFs displays.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.12.0 Introduced on the S4810.
8.4.1.0 Introduced.
Usage Information The following describes the show track command shown in the Example below.
Output Description
Track object-id Displays the number of the tracked object.
Interface type
slot/port, IP route
ip-address, IPv6
route ipv6-
address
Displays the interface type and slot/port number or address
of the IPv4/IPv6 route that is being tracked.
object is Up/
Down
Up/Down state of tracked object; for example, IPv4
interface, reachability or metric threshold of an IP route.
number changes,
last change time
Number of times that the state of the tracked object has
changed and the time since the last change in
hours:minutes:seconds.
First hop interface Displays the type and slot/port number of the first-hop
interface of the tracked route.
Tracked by Client that is tracking an object’s state; for example, VRRP.
Example
Dell# show track
Track 1
IP route 23.0.0.0/8 reachability
Object Tracking
1173