CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1151

Parameters

maximum limit Enter the keyword maximum then the hop limit value. The

range is from 0 to 254.

minimum limit Enter the keyword minimum then the hop limit value. The

range is from 0 to 254.

Defaults None

Command Modes POLICY LIST CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.9(0.0) Introduced on the Z9500.

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–

ON, and Z9000 switches.

Commands

• ipv6 nd ra-guard enable — configure the RA guard related commands.

• ipv6 nd raguard policy policy-name — define the RA guard policy name and

enter the RA guard policy configuration mode.

ipv6 nd ra-guard attach-policy

Apply the IPv6 RA guard to a specific interface.

Syntax

ipv6 nd ra-guard attach—policy policy-name [vlan [vlan 1, vlan

2, vlan 3.....]]

Parameters

policy policy-

name

Enter the keyword policy then the policy name. The

policy-name allows a maximum of 140 characters.

vlan [vlan 1, vlan 2,

vlan 3........]

Enter the keyword vlan then the VLAN range. The VLAN

range is from 1 to 4094.