CLI Guide

Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, and Z9000 switches.
device-role
Specify the role of the device attached to the port.
Syntax
device-role {host | router}
To reset the device role, use the no device-role {host | router}
command.
Parameters
host Enter the keyword host to set the device-role as host.
router Enter the keyword router to set the device-role as router.
Defaults None
Command Modes POLICY LIST CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.9(0.0) Introduced on the Z9500.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, and Z9000 switches.
Related
Commands
• ipv6 nd raguard policy policy-name — define the RA guard policy name and
enter the RA guard policy configuration mode.
• ipv6 nd ra-guard enable — configure the RA guard related commands.
hop-limit
Enable the verification of the advertised hop count limit. If this command is not configured, the
verification process is bypassed.
Syntax
hop-limit {maximum | minimum limit}
To reset the hop count limit, use the no hop-limit {maximum | minimum
limit} command.
1156
Neighbor Discovery Protocol (NDP)