CLI Guide

Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name
of the VRF to configure this setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
static (OPTIONAL) Enter the keyword static to view static
multicast routes.
group-address
[source-address]
(OPTIONAL) Enter the multicast group-address to view only
routes associated with that group. Enter the source-address
to view routes with that group-address and source-address.
count (OPTIONAL) Enter the keyword count to view the number
of multicast routes and packets.
snooping [vlan
vlan-id] [group-
address [source-
address]]
Enter the keyword snooping to display information on the
multicast routes PIM-SM snooping discovers.
Enter a VLAN ID to limit the information displayed to the
multicast routes PIM-SM snooping discovers on a specified
VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source
multicast address in dotted decimal format (A.B.C.D) to limit
the information displayed to the multicast routes PIM-SM
snooping discovers for a specified multicast group and
source.
summary (OPTIONAL) Enter the keyword summary to view a summary
of all routes.
vlt (OPTIONAL) Enter the keyword vlt to view multicast routes
with a spanned incoming interface. Enter a multicast group
address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified
multicast group and optionally a source multicast address in
dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the
keyword count to display the total number of multicast
routes with the spanned IIF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
1146
Multicast