CLI Guide

329 bytes received in 0.018 seconds (17.95 Kbytes/s)
ftp>
ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information After you enable FTP server functions with the ftp-server enable command,
Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
Commands
• ftp-server enable — enables FTP server functions on the E-Series.
112
Control and Monitoring