CLI Guide

Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.3(0.0) Introduced on the S4810, S4820T, S6000, Z9000, and MXL
platforms.
Default Disabled
Usage Information By default this command is disabled. There might be some ARP table entries which
are resolved through ARP packets which had Ethernet MAC SA different from MAC
information inside the ARP packet. This unicast data traffic flooding occurs only for
those packets which use these ARP entries.
1104
Microsoft Network Load Balancing