CLI Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1101

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

output-range

interface

For a multicast MAC address, enter the keyword output-

range then one of the following interfaces to indicate a

range of ports for which traffic is forwarded:

• For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet then the slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

• For a port channel interface, enter the keywords port-

channel then a number.

vlan vlan-id Enter the keyword vlan then a VLAN ID number from 1 to

4094.

Defaults Not configured.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.3(0.0) Added support for multicast MAC address on the MXL

platform.

Example

(Multicast)

mac-address-table static 01:00:5E:01:00:01 {multicast vlan

2 output—range Gi 1/2,Gi 1/3}

ip vlan-flooding

Enable unicast data traffic flooding on VLAN member ports.

Syntax