CLI Guide

vlan-name Enter the keywords vlan-name to advertise the vlan-name
TLV. This keyword is only supported on the C-Series and S-
Series.
Defaults Disabled.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series. Added the vlan-name option.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Related
Commands
• protocol lldp (Configuration) — enable LLDP globally.
• debug lldp interface — debug LLDP.
• show lldp neighbors — display the LLDP neighbors.
advertise dot3-tlv
Advertise dot3 TLVs (Type, Length, Value).
S3100 series
Syntax
advertise dot3-tlv {max-frame-size | power-via-mdi}
To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-
size | power-via-mdi} command.
Parameters
max-frame-size Enter the keywords max-frame-size to advertise the dot3
maximum frame size TLV.
1074
Link Layer Discovery Protocol (LLDP)