CLI Guide

Version Description
pre-6.2.1.1 Introduced on the E-Series.
Usage Information
To return VLAN 1 as the Default VLAN, use this command syntax (default-vlan-
id 1).
The Default VLAN contains only untagged interfaces.
Related
Commands
• interface vlan — configure a VLAN.
default-vlan disable
Disable the default VLAN so that all switchports are placed in the Null VLAN until they are explicitly
configured as a member of another VLAN.
Defaults Enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced
Usage Information The no default vlan disable command is not listed in the running-
configuration, but when the default VLAN is disabled, default-vlan disable is
listed in the running-configuration.
Layer 2
1053