CLI Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on the E-Series.
8.3.7.0 Introduced on the S4810.
pre-6.2.1.1 Introduced on the E-Series.
Usage Information MAC Accounting information can be accessed using SNMP via the Force10 Monitor
MIB. For more information about enabling SNMP, refer to the Dell Networking OS
Configuration Guide.
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC
addresses in an increasing order using SNMP. As a workaround, you can use
the -C c option in snmpwalk or snmpbulkwalk to access the Force10
MONITOR MIB. For example: % snmpwalk -C c -v 2c -c public 133.33.33.131
enterprise.6027.3.3.3
Example
Dell-1# show mac accounting destination interface
gigabitethernet 2/1
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Gi 11/1 1000 10000 5120000
00:44:00:00:00:01 Gi 11/1 1000 10000 5120000
00:22:00:00:00:00 Gi 11/1 1000 10000 5120000
00:44:00:00:00:02 Gi 11/1 2000 10000 5120000
00:44:00:00:00:01 Gi 11/1 2000 10000 5120000
Dell-1#
Related
Commands
• show mac accounting access-list — display the MAC access list configurations
and counters (if configured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
Syntax
show mac learning-limit [violate-action] [detail] [interface
interface]
Parameters
violate-action (OPTIONAL) Enter the keywords violate-action to
display the MAC learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC
learning limit in detail.
1050
Layer 2