CLI Guide

Link Aggregation Control Protocol (LACP)

This section contains commands for Dell Networks’ implementation of the link aggregation control

protocol (LACP) for creating dynamic link aggregation groups (LAGs) — known as “port-channels” in the

Dell Networking OS.

NOTE: For static LAG commands based on the standards specified in the IEEE 802.3 Carrier sense

multiple access with collision detection (CSMA/CD) access method and physical layer

specifications, see Port Channel Commands .

clear lacp counters

Clear port channel counters.

Syntax

clear lacp port-channel-number counters

Parameters

port-channel-

number

Enter a port-channel number. The range is from 1 to 128.

Defaults Without a Port Channel specified, the command clears all Port Channel counters.

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

1026

Link Aggregation Control Protocol (LACP)