CLI Guide

IS-IS: Level-1 SPF Calculations : 0
IS-IS: Level-2 SPF Calculations : 389
IS-IS: LSP checksum errors received : 0
IS-IS: LSP authentication failures : 0
Dell#
spf-interval
Specify the minimum interval between shortest path first (SPF) calculations.
Syntax
spf-interval [level-l | level-2] interval seconds
[initial_wait_interval seconds [second_wait_interval seconds]]
To restore default values, use the no spf-interval [level-l | level-2]
interval seconds [initial_wait_interval seconds
[second_wait_interval seconds]] command.
Parameters
level-l (OPTIONAL) Enter the keyword level-1 to apply the
configuration to Level-1 SPF calculations.
level-2 (OPTIONAL) Enter the keyword level-2 to apply the
configuration to Level-2 SPF calculations.
interval seconds Enter the maximum number of seconds between SPF
calculations. The range is from 0 to 120 seconds. The
default is 10 seconds.
initial_wait_interv
al seconds
(OPTIONAL) Enter the initial wait time, in seconds, before
running the first SPF calculations. The range is from 0 to 120
seconds. The default is 5 seconds.
second_wait_inte
rval seconds
(OPTIONAL) Enter the wait interval, in seconds, between the
first and second SPF calculations. The range is from 0 to 120
seconds. The default is 5 seconds.
Defaults See Parameters.
Command Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command History
This guide is platform-specific. For command information about other platforms,
see the relevant Dell Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
1024
Intermediate System to Intermediate System (IS-IS)