Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

791

792

793

794

795

796

797

798

799

800

Parameters

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to enable the debug

information on IS-IS for an adjacency tied to that VRF. This command displays the IIH

related debug details.

interface

(OPTIONAL) Identifies the interface type and the interface information:

• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the

slot/port information.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

•

For a port channel interface, enter the keywords port-channel then a number.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Added support for VRF. Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.2(0.2) Introduced on the Z9000.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

debug isis local-updates

To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic information.

Syntax

debug isis [vrf vrf-name] local-updates [interface]

To turn off debugging, use the no debug isis [vrf vrf—name] updates [interface] command.

Parameters

vrf

vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to enable the

debugging information on IS-IS corresponding to that VRF. This information contains local

updates tied to the VRF that you specify. This command displays the local LSP debugging

details of the current unit.