Administrator Guide

Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the C-Series and E-Series.
Example
DellEMC# show boot system stack-unit 1
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------------
Stack-unit 1 FLASH BOOT 9-0(2-1) 9-0(2-0)[boot]
DellEMC#
show bootvar
Display the variable settings for the boot parameters.
Syntax
show bootvar
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Output expanded to display current reload mode (normal or Jumpstart).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
DellEMC# show bootvar
PRIMARY IMAGE FILE = system://B
70 File Management