Administrator Guide

clear counters eee
Clear the counters for EEE on all copper ports or specific ports.
Syntax
clear counters [interface—type [slot/port | slot/port-range]] eee
Parameters
interface-type Enter the interface information as GigabitEthernet or TenGigabitEthernet
followed by the slot and the port number or range of port numbers.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S3100 series, S4820T, and S5000.
Usage Information
Use the clear counters eee command to clear counters for EEE on all the copper ports.
Use the clear counters interface-type slot/port eee command to clear the counters for EEE on
the specified port.
Use the clear counters interface-type slot/port-range eee to clear the counters for EEE on
the specified range of ports.
Example
DellEMC# clear counters eee
Clear eee counters on all Copper Ports [confirm] y
DellEMC#
DellEMC# clear counters gigabitethernet 1/1 eee
Clear eee counters on Gi 1/1 [confirm] y
DellEMC#
DellEMC# clear counters gigabitethernet 1/1-10 eee
Clear eee counters on Gi 1/1-10 [confirm] y
DellEMC#
clear dampening
Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [interface]
Parameters
interface (OPTIONAL) Enter any of the following keywords and the interface information to clear
counters from a specified interface:
• For a Port Channel interface, enter the keywords port-channel then a number.
• For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then the
slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
Defaults Without an interface specified, the command clears all interface dampening counters.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
Interfaces 593