Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

491

492

493

494

495

496

497

498

499

500

Version Description

9.12(1.0) Introduced on the S5048F–ON.

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100-ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.2.(0.0) Introduced on the S4810 and S4820T.

9.0.2.0 Introduced on the S6000.

8.3.11.1 Introduced on the Z9000.

8.3.1.0 Introduced on the E-Series.

7.8.1.0 Introduced on the C-Series and S-Series.

lease

Specify a lease time for the addresses in a pool.

Syntax

lease {days [hours] [minutes] | infinite}

Parameters

days

Enter the number of days of the lease. The range is from 0 to 31.

hours

Enter the number of hours of the lease. The range is from 0 to 23.

minutes

Enter the number of minutes of the lease. The range is from 0 to 59.

infinite Specify that the lease never expires.

Defaults 24 hours

Command Modes DHCP <POOL>

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.