Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

311

312

313

314

315

316

317

318

319

320

multiplier

value

Enter the keywords multiplier to specify the number of packets that must be missed

in order to declare a session down. The range is from 3 to 50. The default is 3.

role [active |

passive]

Enter the role that the local system assumes:

• Active — The active system initiates the BFD session. Both systems can be active

for the same session.

• Passive — The passive system does not initiate a session. It only responds to a

request for session initialization from the active system.

The default is Active.

Defaults Refer to Parameters.

Command Modes INTERFACE

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC

Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.10.0 Introduced on the S4810.

8.2.1.0 Introduced on the E-Series.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Example

DellEMC(conf-if-gi-1/3)# bfd interval 250 min_rx 300 multiplier 4 role

passive

DellEMC(conf-if-gi-1/3)#

bfd protocol-liveness

Enable the BFD protocol liveness feature.

Syntax