Administrator Guide

3/30 10 up up
4/53 10 up up
4/54 10 up up
5/53 10 up up
5/54 10 up up
6/53 10 up up
6/54 10 up up
7/29 10 up up
7/30 10 up up
8/29 10 up up
8/30 10 up up
9/29 10 up up
9/30 10 up up
10/53 10 up up
10/54 10 up up
11/29 10 up up
11/30 10 up up
12/53 10 up up
12/54 10 up up
DellEMC#
Example
(Topology)
DellEMC#show system stack-ports topology
Topology: Ring
Interface Connection
---------------------
1/29 2/29
1/30 3/29
2/29 1/29
2/30 4/54
3/29 1/30
3/30 7/29
4/53 5/54
4/54 2/30
5/53 12/54
5/54 4/53
6/53 11/30
6/54 12/53
7/29 3/30
7/30 8/29
8/29 7/30
8/30 9/29
9/29 8/30
9/30 10/54
10/53 11/29
10/54 9/30
11/29 10/53
11/30 6/53
12/53 6/54
12/54 5/53
DellEMC#
Related
Commands
• reset stack-unit – resets the designated stack member.
• show hardware stack-unit – displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
• show system – displays the current status of all stack members or a specific member.
stack-unit priority
Configure the ability of a switch to become the management unit of a stack.
Syntax
stack-unit stack-number priority priority-value
Parameters
stack-number Enter the stack member unit identifier.
priority-value This preference parameter allows you to specify the management priority of one backup
switch over another, with 1 as the lowest priority and 14 being the highest. The switch
Stacking 1503