Administrator Guide

radius-server attribute include-in-access-req
Initiates the RADIUS server with the Framed-IP-address or Framed-IPv6-address to be assigned to the host connected to the switch.
Syntax
radius-server attribute attribute-number include-in-access-req
Parameters
attribute
attribute-number
Enter the attribute keyword and the number.
• 8- Enter the number to initiate the RADIUS server with the Framed-IP-address to be
assigned to the host.
• 168- Enter the number to initiate the RADIUS server with the Framed-IPv6-address
to be assigned to the host.
Defaults Disabled.
Command Modes
• CONFIGURATION
Usage Information
• An OS9 switch or NAS sends the IP address of the connected host as attribute to the RADIUS server through
the RADIUS access requests.
• To remove the attribute configuration, enter the no form of the command.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.3P2) Introduced on the S3100 series.
Example
DellEMC(conf)# radius-server attribute 8 include-in-access-req
DellEMC(conf)# radius-server attribute 168 include-in-access-req
radius-server deadtime
Configure a time interval during which non-responsive RADIUS servers to authentication requests are skipped.
Syntax
radius-server deadtime seconds
To disable this function or return to the default value, use the no radius-server deadtime command.
Parameters
seconds Enter a number of seconds during which non-responsive RADIUS servers are skipped.
The range is from 0 to 2147483647 seconds. The default is 0 seconds.
Defaults 0 seconds
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
1336 Security