Administrator Guide

The following is a list of the DellEMC Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
Usage Information
The power inline restore command enables or restores the temporarily suspended PoE power supply to
all the ports on a stack unit.
Example
Dell#power inline restore stack-unit 1
power inline suspend
You can use this command to disable PoE power supply to all the ports in a stack unit temporarily.
Syntax
power inline suspend stack-unit unit number
Parameters
stack-unit unit
number
Enter the keyword stack-unit and the stack unit number. Range is 1 to 12.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the DellEMC Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
Usage Information
The power inline suspend command temporarily disables PoE power supply to all the ports in the specified
stack unit. You can use the power inline restore command to restore or enable the PoE power supply to
the stack unit.
Example
DellEMC#power inline suspend stack-unit 1
DellEMC#show power inline stack-unit 1
% Error: Power to stack-unit 1 is in suspended state.
DellEMC#
show power detail
You can use this command to display the inline power consumption details for a specified stack unit.
Syntax
show power detail {stack-unit unit number}
Parameters
stack-unit unit
number
Enter the stack-unit keyword and the unit number. Range is 1 to 12.
Defaults None
Command Modes EXEC
Power over Ethernet (PoE) 1165