Users Guide

Field Description
● E or No E is displayed on whether the originating router can accept AS External
LSAs.
LS Type Displays the LSA’s type.
Link State ID Displays the Link State ID.
Advertising
Router
Identifies the router ID of the LSA’s originating router.
Checksum Identifies the link state sequence number. This number enables you to identify old
or duplicate LSAs.
Length Displays the Fletcher checksum of an LSA’s complete contents.
Network Mask Displays the length in bytes of the LSA.
Attached Router Identifies the IP address of routers attached to the network.
Example
Dell# show ip ospf 1 data network
OSPF Router with ID (20.20.20.5) (Process ID 1)
Network (Area 0.0.0.0)
LS age: 1372
Options: (No TOS-capability, DC, E)
LS type: Network
Link State ID: 202.10.10.2
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000006
Checksum: 0xa35
Length: 36
Network Mask: /24
Attached Router: 20.20.20.8
Attached Router: 20.20.20.9
Attached Router: 20.20.20.7
Network (Area 0.0.0.1)
LS age: 252
Options: (TOS-capability, No DC, E)
LS type: Network
Link State ID: 192.10.10.2
Advertising Router: 192.10.10.2
LS Seq Number: 0x80000007
Checksum: 0x4309
Length: 36
Network Mask: /24
Attached Router: 192.10.10.2
Attached Router: 20.20.20.1
Attached Router: 20.20.20.5
Dell#
Related
Commands
● show ip ospf database — display OSPF database information.
show ip ospf database nssa-external
Display NSSA-External (type 7) LSA information.
Syntax
show ip ospf [process-id | vrf vrf-name ] database nssa-external [link-
state-id] [adv-router ip-address]
974 Open Shortest Path First (OSPFv2 and OSPFv3)