Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

861

862

863

864

865

866

867

868

869

870

Table Of Contents

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

6.2.1.1 Introduced

ip msdp mesh-group

To be a member of a mesh group, configure a peer.

Syntax

ip msdp mesh-group {name} {peer address}

To remove the peer from a mesh group, use the no ip msdp mesh-group {name} {peer

address} command.

Parameters

name

Enter a string of up to 16 characters long for as the mesh group name.

peer address

Enter the peer address in a dotted decimal format (A.B.C.D.).

Defaults Not configured.