Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

851

852

853

854

855

856

857

858

859

860

Table Of Contents

To return to the default, use the no advertise med streaming-video {vlan-id

layer2_priority DSCP_value} | {priority-tagged number} command.

Parameters

vlan-id

Enter the VLAN ID. The range is from 1 to 4094.

layer2_priority

Enter the Layer 2 priority. The range is from 0 to 7.

DSCP_value

Enter the DSCP value. The range is from 0 to 63.

priority-tagged

number

Enter the keywords priority-tagged, the Layer 2 priority, and then the DSCP

value.

Defaults Unconfigured.

Command Modes CONFIGURATION (conf-lldp)

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series.

7.6.1.0 Introduced on the C-Series and E-Series.

Commands

● debug lldp interface — debug LLDP.

● show lldp neighbors — display the LLDP neighbors.

advertise med video-conferencing

To advertise dedicated video conferencing and other similar appliances that support real-time interactive video, configure the

system.

Syntax

advertise med video-conferencing {vlan-id layer2_priority DSCP_value} |

{priority-tagged number}

To return to the default, use the no advertise med video-conferencing {vlan-id