Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

Table Of Contents

cam-acl-vlan

Specify the number of VFP blocks allocated to OpenFlow.

Syntax

cam-acl-vlan {default | vlanopenflow {0|1}}

Defaults Disabled.

Parameters

default Reset VLAN CAM ACL entries to default settings

vlanopenflow Enter the number 1 to allocate VFP blocks and enable OpenFlow.

(Default) Enter the number 0 to disable OpenFlow.

Command Modes CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.1.(0.0) Introduced on S4810.

8.3.19.0 Introduced on the S4820T.

Usage

Information

Reboot the switch after changing the parameter values for changes to take effect.

For platform-specific instructions about using this command, see the SDN section of the Dell Networking

OS Configuration Guide.

clear line

Reset a terminal line.

Syntax

clear line {line-number | console 0 | vty number}

Parameters

line-number

Enter a number for one of the 12 terminal lines on the system. The range is from 0

to 11.

aux 0 Enter the keywords aux 0 to reset the auxiliary port.

console 0 Enter the keywords console 0 to reset the console port.

vty number

Enter the keyword vty then a number to clear a terminal line. The range is from 0

to 9.

Command Modes EXEC Privilege