Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

831

832

833

834

835

836

837

838

839

840

Table Of Contents

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series. Added the vlan-name option.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Commands

● protocol lldp (Configuration) — enable LLDP globally.

● debug lldp interface — debug LLDP.

● show lldp neighbors — display the LLDP neighbors.

advertise dot3-tlv

Advertise dot3 TLVs (Type, Length, Value).

S3100 series

Syntax

advertise dot3-tlv {max-frame-size | power-via-mdi}

To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size | power-

via-mdi} command.

Parameters

max-frame-size Enter the keywords max-frame-size to advertise the dot3 maximum frame size

TLV.

power-via-mdi Enter the keyword power—via-mdi to advertise IEEE 802.3 at power-via-mdi

TLV.

Defaults None

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.