Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

801

802

803

804

805

806

807

808

809

810

Table Of Contents

Parameters

priority-value

Enter the port-priority value. The higher the value number, the lower the priority.

The range is from 1 to 65535. The default is 32768.

Defaults 32768

Command Modes INTERFACE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

lacp system-priority

Configure the LACP system priority.

Syntax

lacp system-priority priority-value