Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

601

602

603

604

605

606

607

608

609

610

Table Of Contents

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.9(0.0) Added support to display the interface configurations corresponding to a range of

ports.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.5.1.0 Added support for 4-port 40G line cards on the E-Series.

8.1.1.0 Introduced on the E-Series.

7.8.1.0 Output augmented with diagnostic data for pluggable media.

7.7.1.0 Removed three fields in the output: Vendor Name, Vendor OUI, and Vendor PN.

7.6.1.0 Introduced on the C-Series and S-Series.

6.5.4.0 Introduced on the E-Series.

Usage

Information

The following describes the show interfaces transceiver command shown in the following

example.

Line Description

Rx Power

measurement

type

Output depends on the vendor, typically either “Average” or “OMA” (Receiver

optical modulation amplitude).

Temp High Alarm

threshold

Factory-defined setting, typically in Centigrade. Value differs between SFPs and

SFP+.

Voltage High

Alarm threshold

Displays the interface index number used by SNMP to identify the interface.

Bias High Alarm

threshold