Users Guide

configuration as the startup configuration after formatting the flash (use the write
memory command or copy running-config startup-config command).
Related
Commands
● copy — copy one file to another location.
● show file-systems — display information about the file systems on the system.
mkdir
Creates a directory on the NFS mounted file system.
Syntax
mkdir nfsmount://mount-point/usrname
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S-Series.
Example
Dell# mkdir nfsmount:/nfs-mountpoint/guest
Dell#
Related
Commands
● rmdir — remove a directory.
mount nfs
Mounts an NFS file system to a device.
Syntax
mount nfs rhost:path mount-point [username password]
Parameters
Enter the following location keywords and information:
rhost:path Enter the remote hosts’s path directory.
mount-point Enter the folder name in the local file system.
username (OPTIONAL) Enter the user name to access the device.
password (OPTIONAL) Enter the password.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
60 File Management