Users Guide

show hardware ip
Display ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select between ACL or QoS
data.
stack-unit
number
Enter the keywords stack-unit then a number to select a stack ID.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The range is from 0 to 0.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack
member.
Syntax
stack-unit stack-unit-number {cpu data-plane statistics | cpu management
statistics | [ drops [unit number | fpga register | party-bus statistics
| stack-port | ti-monitor | unit 0-1 {counters | details | port-stats
[detail] | register}}
Parameters
stack-unit stack-
unit-number
{command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based on
the option entered. The range is from 1 to 12.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics then the keywords stack
port and its number, from 1 to 52 to display the data plane statistics, which
shows the High Gig (Higig) port raw input/output counter statistics to which the
stacking module is connected.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to display the Management
plane input/output counter statistics of the pseudo party bus interface.
446 Debugging and Diagnostics