Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

441

442

443

444

445

446

447

448

449

450

Table Of Contents

Version Description

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.0 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

Usage

Information

This command enables a hardware watchdog mechanism that automatically reboots an Dell Networking

OS switch/ router with a single unresponsive unit. This behavior is a last-resort mechanism intended to

prevent a manual power cycle.

show hardware mac

Display MAC ACL entries for the specified stack-unit, port-pipe and pipeline ID.

Syntax

show hardware mac {eg-acl | in-acl} stack-unit id port-set 0–0

Parameters

eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to select between

ingress or egress ACL data.

stack-

unit id

Enter the keyword stack-unit to select the stack unit ID.

port-set

0–0

Enter the keywords port-set with a port-pipe number to display the MAC ACL

entries for the specified port-pipe number. . The range is from 0 to 0.

Defaults None

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.