Users Guide

PIM any any _ Q11 _ _
UDP (RIP) any 520 _ Q9 _ _
TCP (SSH) any 22 _ Q6 _ _
TCP (TELNET) any 23 _ Q6 _ _
VRRP any any _ Q10 _ _
Dell#
show ipv6 protocol-queue-mapping
Display the queue mapping for each configured IPv6 protocol.
Syntax
show ipv6 protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Example
Dell# show ipv6 protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort Rate (kbps)
-------- -------- -------- ------- ----- ------ -----------
TCP (BGP) any/179 179/any _ Q9 _ _
ICMPV6 NA any any _ Q6 _ _
ICMPV6 RA any any _ Q6 _ _
ICMPV6 NS any any _ Q5 _ _
ICMPV6 RS any any _ Q5 _ _
ICMPV6 any any _ Q6 _ _
VRRPV6 any any _ Q10 _ _
OSPFV3 any any _ Q9 _ _
Dell#
show mac protocol-queue-mapping
Display the queue mapping for the MAC protocols.
Syntax
show mac protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Control Plane Policing (CoPP) 437