Users Guide

Usage
Information
This command applies the service-policy based on the type of protocol defined in the ACL rules.
Create ACL and QoS policies prior to enabling this command.
Example
Dell#show cpu-queue rate cp
Service-Queue Rate (PPS) Burst (Packets)
-------------- ----------- ----------
Q0 600 512
Q1 1000 50
Q2 300 50
Q3 1300 50
Q4 2000 50
Q5 400 50
Q6 400 50
Q7 400 50
Q8 600 50
Q9 600 50
Q10 600 50
Q11 300 50
Dell#
show ip protocol-queue-mapping
Display the queue mapping for each configured protocol.
Syntax
show ip protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell# show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort Rate (kbps)
-------- -------- -------- ------- ----- ------ -----------
TCP (BGP) any/179 179/any _ Q9 _ _
UDP (DHCP) 67/68 68/67 _ Q10 _ _
UDP (DHCP-R) 67 67 _ Q10 _ _
TCP (FTP) any 21 _ Q6 _ _
ICMP any any _ Q6 _ _
IGMP any any _ Q11 _ _
TCP (MSDP) any/639 639/any _ Q11 _ _
UDP (NTP) any 123 _ Q6 _ _
OSPF any any _ Q9 _ _
436 Control Plane Policing (CoPP)