Users Guide

Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage
Information
The bestpath router bgp configuration mode command changes the default bestpath
selection algorithm. The multipath-relax option allows load-sharing across providers with different
(but equal-length) autonomous system paths. Without this option, ECMP expects the AS paths to be
identical for load-sharing.
bgp bestpath med confed
Enable MULTI_EXIT_DISC (MED) attribute comparison on paths learned from BGP confederations.
Syntax
bgp bestpath med confed
To disable MED comparison on BGP confederation paths, enter the no bgp bestpath med confed
command.
Defaults Disabled
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
The software compares the MEDs only if the path contains no external autonomous system numbers. If
you enable this command, use the clear ip bgp * command to recompute the best path.
Border Gateway Protocol 325