Users Guide

dot1x port-control
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
force-authorized Enter the keywords force-authorized to forcibly authorize a port.
auto Enter the keyword auto to authorize a port based on the 802.1X operation result.
force-
unauthorized
Enter the keywords force-unauthorized to forcibly de-authorize a port.
Defaults None
Command Modes Auto
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage
Information
The authenticator completes authentication only when you set port-control to auto.
dot1x profile
Configure a dot1x profile to define a list of trusted supplicant MAC addresses.
Syntax
[no] dot1x profile profile-name
Parameters
profile-name Enter a dot1x profile-name. The profile name length is limited to 32 characters.
Defaults None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Error Strings NONE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
802.1X 171