Users Guide

traceroute cache size
Set the size of the link trace cache.
Syntax
traceroute cache size entries
Parameters
entries Enter the number of entries the link trace cache can hold. The range is from 1 to
4095 entries.
Defaults 100 entries
Command Modes ETHERNET CFM
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the S-Series.
traceroute ethernet
Send a linktrace message to an MEP.
Syntax
traceroute ethernet domain [name | level] ma-name remote {mep-id mep-id |
mac-addr mac-address}
Parameters
domain name |
level
Enter the keyword domain then the domain name or level.
ma-name ma-
name
Enter the keyword ma-name then the maintenance association name.
mepid mep-id Enter the MEP ID that is the trace target.
mac-addr mac-
address
Enter the MAC address of the trace target.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
802.1ag 159