Users Guide

Version Description
8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies to a single interface. When you use this command with the vrrp delay reload
command, the later timer rules VRRP enabling. For example, if vrrp delay reload is 600 and vrrp
delay minimum is 300:
● When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all interfaces
that are up and configured for VRRP.
● When an interface comes up, whether as part of a system reload or an interface reload, the system
waits 300 seconds (5 minutes) to bring up VRRP on that interface.
Related
Command
● vrrp delay reload — sets the delay time for VRRP initialization after a system reboot.
vrrp delay reload
Set the delay time for VRRP initialization after a system reboot.
Syntax
vrrp delay reload seconds
Parameters
seconds Enter the number of seconds for the delay. The frange is from 0 to 900 (0
indicates no delay).
Defaults 0
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies to all the VRRP interfaces on a system. When you use this command with the
vrrp delay minimum command, the later timer rules VRRP enabling. For example, if vrrp delay
reload is 600 and vrrp delay minimum is 300:
● When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all interfaces
that are up and configured for VRRP.
● When an interface comes up, whether as part of a system reload or an interface reload, the system
waits 300 seconds (5 minutes) to bring up VRRP on that interface.
For the delay timers to take effect, save the configuration and reload the system.
Related
Command
● vrrp delay minimum — sets the delay time for VRRP initialization after a line card reboot.
Virtual Router Redundancy Protocol (VRRP) 1485