Users Guide

show vlt counters
Displays counter information.
Syntax
show vlt counters [arp| igmp-snoop | interface | mac | ndp]
Parameters
arp Enter the keyword arp to display the ARP counter information for the VLT.
igmp-snoop Enter the keywords igmp-snoop to display the igmp-snooping counter
information for the VLT.
interface Enter the keyword interface to display the interface counter information for the
VLT.
mac Enter the keyword mac to display the MAC address counter information for the
VLT.
ndp Enter the keyword ndp to display the VLT counter information for NDP.
Default Not configured.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
If you do not add a parameter such as arp or mac, the output displays all the counters.
Example
Dell# show vlt counter
Total VLT counters
-------------------------
L2 Total MAC-Address Count :
IGMP MRouter Vlans count :
IGMP Mcast Groups count :
ARP entries count :
Example (igmp-
snoop)
Dell# show vlt counter igmp-snoop
Total IGMP VLT counters
----------------------
IGMP MRouter Vlans count : 1
IGMP Mcast Groups count : 5
Example (igmp-
snoop interface
port-channel)
Dell#show vlt counter igmp-snoop interface port-channel 2
VLT Port-ID: 2 IGMP Counter
Virtual Link Trunking (VLT) 1461