Users Guide

ManualsBrandsDell ManualsAccess PlatformsNetworking S3100 Series

1431

Table Of Contents

description

Specify a name for a customer VRF.

Syntax

description string

To delete the descriptive name for a customer VRF, use the no description string command.

Parameters

string

Enter a descriptive name for the VRF.

Defaults None.

Command Modes VRF MODE

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.5(0.0) Introduced on the Z9500.

9.4.(0.0) Introduced on the S-Series.

ip vrf forwarding

Attach an interface to a VRF.

Syntax

ip vrf forwarding {vrf-name | management}

To delete an interface associated with a configured VRF, use the no ip vrf forwarding {vrf-

name | management} command.

Parameters

vrf-name

Enter name of the VRF that you want to associate the interface to.

management Enter the keyword management to associate an interface to the management

VRF.

Defaults none

Command Modes INTERFACE-CONFIG