Users Guide

Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Added support for IPv6 multicast addresses.
8.3.7.0 Introduced on the S4810.
6.1.1.0 Introduced on the E-Series.
ntp master <stratum>
Configure the switch as NTP Server.
Syntax
ntp master <stratum>
Parameters
ntp
master <stratum>
Enter the stratum number to identify the NTP Server's hierarchy.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0) Introduced on the S4810, S4820T, S5000, S6000, Z9000, and Z9500.
9.2(1.0) Introduced on the Z9500.
ntp offset-threshold
Configure the threshold time interval before which the system generates an NTP audit log message if the time difference from
the NTP server is greater than a threshold value (offset-threshold).
Syntax
ntp offset-threshold threshold-value
System Time and Date 1399