Users Guide

system Enter the keyword system to copy the Dell Networking OS image from the
management unit to the designated stack members.
stack-unit Enter the stack-unit number. The range is from 1 to 12.
all Enter the keyword all to copy the designated image to all stack members.
A Enter the keyword A to upgrade all stacked units in System A ( only).
B Enter the keyword B to upgrade all stacked units in System B ( only).
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage
Information
To reboot using the new image, use the upgrade boot system stack-unit command.
Related
Commands
● reload — reboots Dell Networking OS.
● reset stack-unit — resets the designated stack member.
● show system (S-Series and Z-Series) — displays the status of all stack members or a specific
member.
● show version — displays the current Dell Networking OS version information on the system.
1364 Stacking