Users Guide

upper number (OPTIONAL) Enter the keyword upper then the upper number. The range is from
0 to 31.
lower number (OPTIONAL) Enter the keyword lower then the lower number. The range is from
0 to 31.
numeric number (OPTIONAL) Enter the keyword numeric then the numeric number. The range is
from 0 to 31.
special-char
number
(OPTIONAL) Enter the keywords special-char then the number of special
characters permitted. The range is from 0 to 31.
The following special characters are supported:
! " # % & ' ( ) ; < = > ? [ \ ] * + , - . / : ^ _ { | } ~ @ $
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced lockout-period option on the Z9500.
9.5(0.0) Introduced lockout-period option on the Z9000, S6000, S4820T, S4810, and
MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.3.1.0 Introduced on the E-Series.
Example In the following example, after 5 un-successful login attempts, the session (SSH/TELNET) goes into a
locked state for 5 minutes. If all the 10 sessions are locked out with 5 un-successful attempts in each
session, no users can login during the lockout-period.
Dell(conf)# password-attributes max-retry 5 lockout-period 5
Related
Commands
● password — specifies a password for users on terminal lines.
service password-encryption
Encrypt all passwords configured in Dell Networking OS.
Syntax
service password-encryption
Security 1213