Users Guide

Table Of Contents
Parameters
media
slot
(OPTIONAL) Enter the keyword media then the stack ID of the stack member for
which you want to display pluggable media inventory.
NOTE: This parameter is available but not supported in Dell Networking
Operating System version 8.3.11.4. Because stacking is not supported, if you
use this parameter, the output displays Media not present or accessible
(refer to the Usage Information section).
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.4 Output expanded to include Piece Part ID (PPID) and eSR4 optics.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced this version of the command for S-Series. S-Series output differs from
E-Series.
Usage
Information
If there are no fiber ports in the unit, just the header under show inventory media displays. If there are
fiber ports but no optics inserted, the output displays Media not present or accessible.
Example (S3100)
Dell#show inventory
System Type : S3124P
System Mode : 1.0
Software Version : 9-8(2-126)
Unit Type Serial Part Rev Piece Part ID Rev Svc Tag Exprs Svc Code
Number Number
------------------------------------------------------------------------------
* 1 S3124P-01-FE-28 N/A N/A N/A N/A
2 S3124P-01-FE-28 N/A N/A N/A N/A
3 S3124P-01-FE-28 N/A N/A N/A N/A
1 S3124P-PWR-UNKNOWN NA N/A N/A N/A 0
1 S3100-FAN N/A N/A N/A N/A
2 S3124P-PWR-UNKNOWN NA N/A N/A N/A 0
2 S3100-FAN N/A N/A N/A N/A
3 S3124P-PWR-UNKNOWN NA N/A N/A N/A 0
3 S3100-FAN N/A N/A N/A N/A
* - Management Unit
Software Protocol Configured
----------------------------
SNMP
Dell#show inventory media
Slot Port Type Media Serial Number
F10Qualified
-------------------------------------------------------------------------
120 Control and Monitoring