Users Guide

show qos policy-map
View the QoS policy map information.
Syntax
show qos policy-map {summary [interface] | detail}
Parameters
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
summary
interface
To view a policy map interface summary, enter the keyword summary and
optionally one of the following keywords and slot/port or number information:
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
detail To view a policy map interface in detail, enter the keyword detail and optionally
one of the following keywords and slot/port or number information:
● For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet then
the slot/port information.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series only: Added trust IPv6 diffserv .
6.2.1.1 Introduced on the E-Series.
Example (IPv4)
Dell# show qos policy-map detail gigabitethernet 1/1
Interface GigabitEthernet 4/1
Policy-map-input policy
Trust dffserv
Quality of Service (QoS) 1123