Users Guide

Parameters
stack-unit unit
number
Enter the stack-unit keyword and the unit number. Range is 1 to 12.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
Example
Dell#show power detail stack-unit 1
Unit Total System Redundancy Inline Inline Inline Inline Inline
Power Power Power Power Power Power Power Power
Available Consumed Consumed Threshold Available Allocated Consumed Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts) (Watts) (Watts)
-------------------------------------------------------------------------------
1 1100 150 0 10 95 0 0 95
Dell#
show power inline
You can use this command to display the PoE power allocation on a specified stack unit or on an interface.
Syntax
show power inline {stack-unit unit number | interface interface SLOT/PORT
[/SUBPORT] }
Parameters
stack-unit unit
number
Enter the keyword stack-unit and the stack unit number Range is from 1 to 12.
interface
interface
SLOT/PORT [/
SUBPORT]
Enter the interface keyword, and specify the interface type followed by the
SLOT/PORT [/SUBPORT] numbers.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
Usage
Information
The following table describes the output fields of the show power inline command:
Field Description
Interface Displays the line card or the interface slot and port number.
Inline Power
Allocated
Displays the amount of power allocated to the port.
1066 Power over Ethernet (PoE)