Users Guide

Parameters
stack-unit unit
number
Enter the keyword stack-unit and the stack-unit number. Range is from 1 to 12.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
Usage
Information
The power inline restore command enables or restores the temporarily suspended PoE power
supply to all the ports on a stack unit.
Example
Dell#power inline restore stack-unit 1
power inline suspend
You can use this command to disable PoE power supply to all the ports in a stack unit temporarily.
Syntax
power inline suspend stack-unit unit number
Parameters
stack-unit unit
number
Enter the keyword stack-unit and the stack unit number. Range is 1 to 12.
Defaults None
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Increased the stacking range to 12 units in S3100 series.
9.8(2.0) Introduced on the S3100 series.
Usage
Information
The power inline suspend command temporarily disables PoE power supply to all the ports in the
specified stack unit. You can use the power inline restore command to restore or enable the PoE
power supply to the stack unit.
Example
Dell#power inline suspend stack-unit 1
Dell#show power inline stack-unit 1
% Error: Power to stack-unit 1 is in suspended state.
Dell#
show power detail
You can use this command to display the inline power consumption details for a specified stack unit.
Syntax
show power detail {stack-unit unit number}
Power over Ethernet (PoE) 1065