Users Guide

NOTE: Applies to specific VRF if input is provided, else applies to Default VRF.
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR activities.
events (OPTIONAL) Enter the keyword group to view PIM messages for a specific group.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of the
optional parameters:
● in: to view incoming packets
● out: to view outgoing packets
register (OPTIONAL) Enter the keyword register to view PIM register address in dotted
decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert |
hello | joinprune |
register]
(OPTIONAL) Enter the keyword timer to view PIM timers. Enter one of the
optional parameters:
● assert: to view the assertion timer
● hello: to view the PIM neighbor keepalive timer
● joinprune: to view the expiry timer (join/prune timer)
● register: to view the register suppression timer
Defaults Disabled.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Introduced on the S-Series.
ip pim bsr-border
Define the border of PIM domain by filtering inbound and outbound PIM-BSR messages per interface.
Syntax
ip pim bsr-border
To return to the default value, use the no ip pim bsr-border command.
Defaults Disabled.
Command Modes INTERFACE
1034 PIM-Sparse Mode (PIM-SM)